Kärcher WD-series Vacuum Hose Coupler – Extend Your Reach Easily
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Many Karcher vacuums only come with a short 2m hose. Connect two Kärcher hoses into one long hose to extend your reach.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 72
- Makes
- 1
- Views
- 458
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Many of the more affordable Kärcher WD vacuum cleaner kits (such as the WD3) come with a relatively short hose of only 2 meters. This can be quite inconvenient when cleaning a larger workshop or when working with power tools and needing more freedom of movement.
With this 3D-printed coupler, you can easily connect two original Kärcher hoses together, significantly extending your working range.
Benefits
- No need to move the vacuum cleaner around as often.
- You can safely leave the vacuum cleaner on the ground while working at height (e.g. on a ladder) → much safer than carrying the vacuum up with you.
- Perfect for workshop use, in the garage, or while cleaning your car.
Compatibility
This model is designed for the standard Kärcher Home & Garden vacuum hoses with the WD3-style connector. According to the site, it should be compatible with:
- Kärcher WD1, WD2, WD3, WD4, WD5, WD6 (and variants such as WD 3 P, WD 3 S, MV3).
- Often also fits WD7 and some NT models (such as NT20/30).
Remix Information
This design is a remix of:
- "Karcher vacuum hose adapter" by @Joshyu_76849
- "Karcher WD3 to Bosch and Makita tools" by @olgapavlova
I simply combined these two designs to create a hose-to-hose coupler.
My Print Settings
- Prusament PETG
- Increased number of perimeters (4) for maximum durability
- I printed this model upright (see pictures)
- 0.6mm nozzle
- Organic supports enabled as there are a couple of overhanging pieces