1 / 4
Prusa Core One Magnetic Cable Holder/Managment
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a magnetic cable management system designed to fit the Core One Frame/Enclosure.
- Rating
- 4.571 / 5
- Likes
- 46
- Downloads
- 147
- Makes
- 7
- Views
- 716
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Welcome!
I needed an easy way to manage all the addons and cables inside and outside of my Prusa Core One printer, so I designed a magnetic cable holder solution.
The cable holder can be fitted anywhere inside/outside the printer, and doesn't need any modifications or screws! IT'S MAGIC (or magnets, you'll decide).
What do we need for this print?
- You will need 2 - 6x3 magnets (per unit).
Variants
- Press in Magent - Print the part and press in the magnets after.
- Embbeded Magnets - Use the provided 3MF file, the print will pause in the correct layer, insert the magnets in, and resume the print.
Print Settings
- Material: PLA Or Above (PETG will be fine)
- Nozzle Size: 0.4mm
- Layer Height: 0.2mm
- Vertical Walls: 2
- Infill: 15%
- Supports: None
Hope you like this design, and if you make it, don't forget to post a make :)
