1 / 2
10 inch rack Proxmox 1U blank with 4 40mm Fans
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I remixed 2 different models to make a 40mm fan blank with the proxmox logo.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 46
- Makes
- 0
- Views
- 654
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Material: PLA Pro/Plus or PETG
Settings:
Nozzle: 0.6mm
Walls: 3 loops = ~2mm (1mm is plenty)
Top/Bottom: 1mm (0.6mm is fine)
Infill: 20% Rectilinear
You don't need it anywhere near that sturdy though so ~1mm walls and .6mm top/bottom would be plenty.
I'm using 40mmx20mm fans I had on hand along with a Owltree 60W PD 4pin PWM fan controller. I used PETG but that's overkill and VoxelPLA pro would have printed much cleaner.