1 / 2
10 inch rack Proxmox 1U blank with 4 40mm Fans
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed 2 different models to make a 40mm fan blank with the proxmox logo.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 654
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (29)Powiązane
Material: PLA Pro/Plus or PETG
Settings:
Nozzle: 0.6mm
Walls: 3 loops = ~2mm (1mm is plenty)
Top/Bottom: 1mm (0.6mm is fine)
Infill: 20% Rectilinear
You don't need it anywhere near that sturdy though so ~1mm walls and .6mm top/bottom would be plenty.
I'm using 40mmx20mm fans I had on hand along with a Owltree 60W PD 4pin PWM fan controller. I used PETG but that's overkill and VoxelPLA pro would have printed much cleaner.