"Couchtischstråla" made with Ikea Stråla
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This lamp is compatible with the E14 IKEA STRÅLA lampcabel, it comes with a built in cable organizer.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 1
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This lamp stand is compatible with the E14 Ikea STRÅLA lampcabel (part nr. 203.664.04). It comes with a built-in cable organizer, and a side pattern for alignment of lamp shades.
Print it with at least 2 walls and a sacrificial layer for the hole or flip it upside down.
The print requires little to no infill depending on your printer's capabilities for bridging.
I brought the print time down to a print time of about 67min, with a 0,4mm-nozzel when printed with about 37g of pla, by printing it upside down (with 3 top and bottom layers, 2 walls, outer wall thickness of 0,4mm inner wall thickness 0,6mm, 0% infill).