Swimming Pool Solar Absorber Mount - Úchyt solárního panleu
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed for mounting solar absorbers on the roof grid - K montáži panelů titan-multiplast.cz na střešní rošt.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
The assembly kit consists of 4 printed parts of the mounting bracket that I modeled and a metal (Al) T-shaped profile, 30x30:3mm. This creates a solid frame that can be easily mounted on the roof grid. I assemble the roof grid from two profiles (square/rectangle). The base layer consists of vertical profiles, a second layer of horizontal ones goes over them and the last layer is the absorber frame. Under the solar absorber I also add 4x I-shaped supporting profiles, on which the weight of the panel rests. Print from durable UV-resistant material, than ASA would be the best choice.
Designed especially for Titan-Multiplast, can fit on others with tube OD 50mm / 1½": https://www.titan-multiplast.cz/storage/titan_CatalogueModule-Download/130-file-File[cs]-solarni-absorbery-akysun.pdfhttps://www.titan-multiplast.cz/storage/titan_CatalogueModule-Download/130-file-File[cs]-solarni-absorbery-akysun.pdf
Montážní kit absorbéru se skládá ze 4ks vytištěných 3d dílů montážního úchytu a 2ks kovových (Al) profilů ve tvaru T, 30x30:3mm. Tím vznikne pevný rám, který lze dále montovat na střešní rošt. Střešní rošt skládám z dvou profilů (čtverec/obdélník). Základní vrstvu tvoří svislé profily, přes ně jde druhá vrstva horizontálních a poslední vrstvou je složený rám absorberu. Pod absorbér ještě přidávám 4 nosné profily ve tvaru písmene I, na kterých spočívá váha panelu. Tiskněte z odolného materiálu odolného vůči UV záření, pak by nejlepší volbou byla ASA.
Pasuje přesně na solární absorbery Titan-Multiplast, viz: https://www.titan-multiplast.cz/storage/titan_CatalogueModule-Download/130-file-File[cs]-solarni-absorbery-akysun.pdfhttps://www.titan-multiplast.cz/storage/titan_CatalogueModule-Download/130-file-File[cs]-solarni-absorbery-akysun.pdf
- Printing instruction:
- Material: ASA/ASA-CF or PETG/PETG-CF (not UV resistant)
- Perimetrs: 4+
- Infill 25% (strong one, like honeycomb)
- Adaptive layer height for smooth curves, but 0.2mm is good enought
- Support Recommanded (Tree), but not necessary