Small box with a border
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It is a small fully printable box to organise small things.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
This is a small box to store small and messy things. It has a border in the middle that can be removed. It is fully 3d printable with a locknig mechanism and a hinge. For the hinge you need to cut off a piece of filament and pass it through the holes on the hinge, burn the edges a bit with a lighter and then squeeze it to make it wider than the hole. How to put on the locking mechanism is shown in a video above.
Print settings:
-infill: I used 10%
-support: just for the locking mechanism ont the box and the lid (there is a picture below)
-layer height: I used 0.2 mm