BD2 "Mantis" - Open source FPV tinywhoop drone
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small and light 65mm tinywhoop with pusher-type frame
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 83
- Makes
- 0
- Views
- 1,351
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- GNU General Public License v3.0
Mantis repo
"Mantis" is 1,2" printable freestyle/racing 1S tinywhoop
watch out!
I'm updating this project often here, for best and actual files please visit my repo. There you can find most actual description and files:
https://github.com/bartoszp1992/mantisDrone
3D printing
frame : PA12
canopy : PA12
FC cover : PA12
motor base : PC-CF / PETG-CF
tail support : TPU
sleeve(optional) : any
box elements: any, except ring: TPU
note: you have to pause printing box, for insert 5x2 magnets.
BOM
mechanical
motor base : printed mantis motor base or NEWBEEDRONE Cockroach V3 Carbon Fiber Motor Base
frame : printed mantis frame or NEWBEEDRONE Cockroach V3 65mm Ultra Light Frame PC/PP- order at least 1 spare
propellers : HQ 31mm Ultralight 3-Blade Propellers (1.0mm Shaft)
PA screws (only for printed frame) : 4x PA M2x15 screws
PA nuts (only for printed frame) : 4x PA M2 nuts
electronic
FC : BETAFPV Matrix 1S Brushless Flight Controller (5IN1)
motors : HAPPYMODEL SE0702 KV28000- make sure to order at least 1 spare
camera : CADDXFPV ant lite / BETAFPV C03
batteries : BETAFPV LAVA 1S 260mAh 3.8V HV 80C BT2.0 (x5) - at least one set
charger : BETAFPV 6 Ports 1S Battery Charger (optionally with adapter)
cable : USB-C cable for communication
control
controller : Jumper Bumblebee, or any other with ELRS and edgeTX
batteries : 2x 18650 any branded Li-Ion cells for controller supply
goggle : BETAFPV VR03 or any other analog goggles
memory : 32G SDcard if you want to record your flights
software
FC config : betaflight configurator
radio config : ExpressLRS Configurator