1 / 3
Waveshare ESP32-S3-POE-ETH Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for Waveshare ESP32-S3-POE-ETH with hexagonal holes in sides and lid.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 404
- Makes
- 1
- Views
- 1,957
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This enclosure is designed for the Waveshare ESP32-S3 Ethernet Development Board with Waveshare PoE Module (B) included in the ESP32-S3-POE-ETH product.
It includes dedicated cutouts for:
The RJ45 Ethernet port
All other interfaces (USB, GPIO headers, buttons, etc.) remain enclosed, making this case suitable for headless or embedded applications where only Ethernet is required with power supplied via PoE.
Example printed in Overture PETG black with 0.2mm layer height. I used 15% infill with supports everywhere. Please forgive the wet PETG.