TILTA_LOWRIDE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact low-profile adapter making the Tilta V-Mount plate more practical and balanced on Blackmagic PYXIS.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 57
- Makes
- 0
- Views
- 433
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
TILTA_LOWRIDE – Compact V-Mount / BPU Adapter Plate for Blackmagic PYXIS 6K & 12K Design by EdZ Description: The TILTA_LOWRIDE is a custom low-profile adapter plate that makes the Tilta BPU/V-Mount Plate for Pyxis more compact, practical, and better balanced when used on the Blackmagic PYXIS 6K or 12K camera.
It reduces the distance between the power plate and the camera body and lowers the battery position, making the PYXIS power button easily accessible.
The lower center of gravity also improves balance when the camera is mounted on a rig or gimbal.
The TILTA_LOWRIDE keeps the full set of Tilta power outputs available, allowing quick V-Mount battery swaps without the need to disconnect or reroute power cables.
No cable desoldering is required: the Tilta power plate fits through the inner cavity of the 3D printed part.
To remove the Tilta screws, use a precise high-quality screwdriver, they are glued and can strip easily.
Typical assembly time after printing: 2 to 3 hours.
Compatibility:
• Tilta BPU/V-Mount Plate
• Blackmagic PYXIS 6K / 12K
• Standard 1/4"-20 mounting pattern
Hardware Required:
• 8 × M3 threaded inserts (length: 4.8–5 mm, outer diameter: 4.8 mm) for 4 mm holes
Recommended Print Settings:
• Material: PLA, PETG, or ASA (depending on desired rigidity and heat resistance)
• Layer Height: 0.2 mm
• Infill: 60–80%
• Wall Thickness: 3–4 perimeters
• Supports: Only if needed in recessed areas
• Bed Temperature: 60–80°C
• Nozzle Temperature: 210–240°C
Notes: Insert the M3 threaded inserts using a soldering iron or heat-set tool before mounting the Tilta plate. Always test the fit carefully before using it with power plates or camera gear. This model has been optimized for strength and compactness, but 3D printing tolerances may vary depending on your setup.
License:
“Pay What You Want”: You can download it for free or support the author.
Commercial redistribution of the STL file is not allowed.
Feel free to remix or adapt for personal use.
Author:
EdZ
If this model helps your rig, you can buy me a coffee ☕