1 / 1
4.5L 1FZ-FE 80 Series Land Cruiser Cylinder Bore Plugs — image 1

4.5L 1FZ-FE 80 Series Land Cruiser Cylinder Bore Plugs

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

1FZ-FE Cylinder Covers / Bore plugs for use during cleaning a head gasket off the block.

Rating
0 / 5
Likes
0
Downloads
11
Makes
0
Views
313
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

I replace head gaskets on 94.5-97 Land Cruisers with 1FZ-FE engines almost weekly. Cleaning the block surface makes a mess and I was tired of having to stuff paper towels into the cylinder bores to prevent debris from getting into the ring areas so I printed these plugs in order to keep the cylinders clean. Probably a bit overkill and most 80 Series land cruiser owners would only have to use them once in their truck's life(hopefully) but for me they've been pretty useful. 

In order to use, once the head is removed turn the engine over(by hand) a few degrees until all the pistons are below the block surface(keep tension on your timing chain) and insert a plug into each of the bores. Once the block surface is clean and ready for reassembly, remove the plugs by turning the engine over(by hand) both clockwise and counter clockwise till each of the pistons pushes the plug up out of the cylinder. 

I painted the 101mm area with a bright colored paint pen to ensure I wouldn't forget to remove them before assembly. 

Print 100% infill with TPU. You will need 6 individual prints.

Tags