1 / 4
SSUPD Meshroom S PC case feets (15, 20, 25, 45, 50, 55 and 60mm height) — image 1
1 / 4

SSUPD Meshroom S PC case feets (15, 20, 25, 45, 50, 55 and 60mm height)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Case feets

Rating
0 / 5
Likes
3
Downloads
32
Makes
0
Views
273
Reviews
0

Updated at source:

Model information

Category
Computers
License
GNU General Public License v3.0

SSUPD Meshroom S feets in 15, 20, 25, 45, 50, 55 and 60mm. Should also work well with NCase M2 and M3.

Needed hardware (multiply by the number of feets)

  • 1x M3x5x4 heatset
  • 1x M3 bolt of 6, 8 or 10mm length
  • (OPTIONAL) 1x M3 shim/washer, since the holes in case are meant for 6/32" imperial bolts (about 3.5mm), M3x6x1 shims works well. Alternatively using M3 bolt with wide head might work just as well.
  • (OPTIONAL) 1x 10mm wide self adhesive silicone feet. There's 0.6mm deep 10.5mm wide recess in the feat meant for it. I used 10x2mm self adhesive silicone feets and it worked really well.

Notes

  • The source CAD file is included and license is open source. Adjust it as you need.
  • To get the heatset flush I usually get it almost all the way in, leaving maybe 1mm or so sticking out and then, while heatset is still hot, pressing it with something very flat. a hotend flat wrench will work or even a glass table. This makes the heatsets flush with surface and also makes heatset get in under right angle.
  • Using hex bolts and ball ended bit or allen key significantly simplifies installation of them.

Tags