Keyhole Slot for Wall Hanging
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add this as a negative volume to anything to make it wall mountable.
- Rating
- 5 / 5
- Likes
- 216
- Downloads
- 3,402
- Makes
- 4
- Views
- 9,331
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Add this as a negative volume on your PrusaSlicer and you'll be able to add hanging slots to any of your prints quick and easy!
It works well for #6 screws. #8 screws are a very tight fit as-is, so just scale the model a bit larger and it will work for them as well.
For the metric world, here are the dimensions: The slot is 4mm wide. The hole has a diameter of 8mm. The slot is 8mm long. It will accommodate a head depth of about 3mm.
If you're resizing this to fit a different type of screw I'd recommend printing out a few test slugs to verify fitment. Each test slug should only take about 10 minutes to print.