Freezing Pixels - Wall Sconce LED Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Minimal 3D wall sconce lamp with up-and-down lighting. Fast to print, easy to mount, and stylish anywhere.
- Rating
- 0 / 5
- Likes
- 44
- Downloads
- 126
- Makes
- 0
- Views
- 927
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Easy-to-print and easy-to-mount wall sconce with a clean up- and downlight effect. Printed in Prusament Galaxy Black for a subtle matte look that fits seamlessly into any modern home.
The lamp mounts to the wall using the included bracket, the lamp body simply clicks onto it for quick installation and easy maintenance.
A standard GU10 LED bulb fits perfectly; I used a simple GU10 lamp holder (similar to link below), which can be secured with a small amount of hot glue.
Recommended Print Settings
Lamp Base
Material: Prusament Galaxy Black
Layer height: 0.20 mm (Speed profile)
Wall Thickness: 3 perimeters
Infill: 5% gyroid
ThickBridges - on
SeamPosition - Random
Wall Mount
Material: Prusament Galaxy Black
Layer height: 0.20 mm (Speed profile)
Wall Thickness: 3 perimeters
Infill: 15% gyroid
GU10 - Holder:
https://www.amazon.com/DiCUNO-Resistant-Maximum-Connector-Packages/dp/B07GVB2P2N/ref=sr_1_6?crid=1YSC5T8AYUUYG&dib=eyJ2IjoiMSJ9.S0CeGQVFSnkUHzeNj0J5GbwTokVkml8hPDXrkCe9kYolY8uz25O0gLVZHP2nZKHWyZQpvpNcT-jWLFSnV9bDsCq6cJhOgYgw1fddq01Yl38YLFqU2gm6CSvmXCySotGbeXwhb7uVqxXpJwzVKYeAMMZscHXVSPOY-v2A1uGxqa0_qlHmIDKisZwPm6ZwZQp81iVVLvTuWTsHxhXUBG7YdjdkXZ-xSTV3imLkWXDf01we6Mv-zrBhTHiAWIOIMsmMUi5e7G_eCLUEDqp9Yv2-YmElQMk1xIOU1F0TbLsQT_E.pYZCD7SmkQBO9EK5VstjLeYTfaVoIHfEktvG1NC27hk&dib_tag=se&keywords=GU10%2BLamp%2BHolder&qid=1763198893&sprefix=gu10%2Blamp%2Bholder%2Caps%2C200&sr=8-6&th=1