1 / 5
Ender 3 V3 SE Z Banding Fix (Oldham Adapter) — image 1
1 / 5

Ender 3 V3 SE Z Banding Fix (Oldham Adapter)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bye, Bye Z Banding!

Rating
0 / 5
Likes
10
Downloads
29
Makes
0
Views
402
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

These height adapters are designed for the Ender 3 V3 SE to provide proper clearance when installing Oldham-style Z-axis couplers. 

The models are not symmetrical — the left and right sides of the printer (as viewed from the back) require slightly different geometries !

IMPORTANT WARNING!
This mod reduces the usable Z height! To avoid collisions, set your maximum Z limit to below 240 mm.

You will need 8 pcs of M3×4×4.2 heat-set inserts for the adapters.
Use the original screws to mount the adapters to the printer.
In addition, you will need 4pcs M3 screws to attach the trapezoidal nut to the Oldham coupler (I received a few of these with the coupler).

Alongside this modification, I strongly recommend using a flexible jaw-type coupler as well.
After assembly, check whether the jaw coupler’s screw is touching the plastic part of the X-axis.
You may need to trim about ~0.5 mm with a scalpel to ensure proper clearance.

Print settings:

  • Material: PETG
  • Walls: 4
  • Infill: 35% gyroid
  • Top: 1.2mm solid
  • Bottom: 1.2mm solid
     

It may also work with the KE version, but this has not been tested.


 

Tags