1 / 2
Sun Visor Clip for resqme Window Breaker Seat Belt Cutter Combo Tool — image 1
1 / 2

Sun Visor Clip for resqme Window Breaker Seat Belt Cutter Combo Tool

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Holder clip to keep your resqme close by

Rating
0 / 5
Likes
12
Downloads
75
Makes
0
Views
320
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Open Community License v1

Mounting clip for a standard resqme tool to attach to the sun visor in your car as shown.

Background/design intent

There are several of these on the platform already, but all of them suffer from the same problem. As designed and as printed, they suffer from material creep, which eventually causes the part to give up its grip on the tool and fail to keep it in place. Inside of an automotive cabin, which can regularly see temperature cycles in excess of 150 degrees F (65C), well past the glass transition temperature of most 3D printer materials, this leads to rapid failure. Even without extreme temperature cycling, the strain of clipping the tool into the mount will eventually cause it to loosen its grip and the tool will drop out with hardly any force applied. At best, this is annoying because you will be frequently picking your resqme up off the floor of your car. At worst, it means it will not be held in place during a crash. 

My design attempts to mitigate this problem by designing the clip as a fully compliant mechanism so that it will not creep under the hoop strain of inserting the tool. This part is best printed out of high-grade engineering filaments like nylons or ABS/ASA but should do okay as PLA or PETG. However, be aware of the aforementioned thermal challenge of the automotive cabin environment. I chose PAHT-CF for the part for its stiffness and high thermal resistance.

I hope I never need this myself, but it's good to know that the tool is kept close by on the driver and passenger side in case I need it to extricate myself or to have it close by if I'm first on scene for some other accident. I've had the unfortunate experience in my life of going through a rollover crash and it's good to have a plan in case it happens to you.

Printing/Slicing

Material

ABS, ASA, PA, or PC recommended

Nozzle Size

I used a 0.6, larger is better

Layer height

.25+, appropriate for your nozzle. Larger is better.

Infill

0% - this part should be all perimeters for strength

Perimeters

Max it out - use 10 or something

Files

  • STEP (printing with STEP is preferred if your slicer takes it)

  • 3MF (in case it does not)

  • Native CAD in Solidworks in case you want to modify it

Tags