Beamcase SFF Side Panels - 2 GPU Slots - 140 IFW
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Side panels for the Beamcase SW 3.0 PC case (2 GPU slot / IFW 140 size)
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 15
- Makes
- 0
- Views
- 349
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
These are the side panels for the Beamcase SW 3.0 PC case (2 GPU slot / IFW 140 size) (by @BeamCase_Des_1734300).
I was strongly inspired by the Beamcase SFF Side Panels (by @Fastrunner07_2540939).
Aim of this remix is to:
Add CPU AIO water-cooling support (top)
Make room for two 120x15mm fans (bottom)
Make room for a 140x140mm fan (front)
Have the most possible opened frame to optimize fresh air apport, but keeping the case structurally “strong enough”.
for… better cooling (obviously! ;-) )
I designed this model to be used with those specific items (non-affiliated links):
Front fan: Noctua NF-A15 HS-PWM chromax.black.swap
Bottom fans: Noctua NF-A12x15 PWM chromax.black.swap (x2)
AIO water-cooling: Artic Cooling Liquid Freezer III Pro 240
Front Panel: Generic USB2/3/C + Sound PCB
Others can probably be used if you respect the footprint of those items (but not tested!).
Case size
height: 299.00 mm
width: 179.00 mm
depth: 342.00 mm
Bill of material
To assemble the model, you'll need:
M3 x 8mm screws (x20)
for all the piece joins (x4)
to hook the top and bottom case parts to the 15x15mm beam (x16)
M3 x 12mm screws (x4)
to attach the case feet
M3 x 35mm screws (x4)
to hook the front case part to the 15x15mm beam
M3 regular nuts (x8)
lock in place the piece joins
M3 DIN562 square nuts (x16)
hook the top and bottom case parts to the 15x15mm beam
Print settings
I splited the biggest parts of the model so they can be printed on most common bed size printers (250x250mm).
filament:
feet: TPU 95A
All other parts: heat resistant (PETG, ABS, ASA, …) filament. I printed mine in PETG-CF.
nozzle size: 0.6 mm
layer: 0.3mm
walls: 2
infill: 20%
I provide a 3MF print profile (Bambulab / P1S) where all the part are already properly placed for optimal print / minimum support needs.
To be continued…
For the most reckless of you, I also provide the STEP file for you to customize the model at your convenience.