Counting matching models…
put a small drop of household oil on top of the shaft then slowly turn the screw make sure the screw is hitting the shaft and not the pulley. Requires one of the Enders long m5 and a nut. Print PLA, hot, with many walls and good 3d infill…
Hey there, I have created this model to upgrade my GPRC Mark 4 frame with the new DJI O3 air unit. I have made 2 Version: Version 1 with DJI O3, antenna and GPS mount: The bottom left and right part to hold the DJI O3 Air Unit in place.…
This is a remix from the excellent and highly detailed model by Burning_Bridges : https://www.thingiverse.com/thing:3067279 The original obj file was not printable as-is. So, I did extensive repair to it to make it printable. I have also…
Made a quick remix of the already discontinued betafpv Micro-Nano module adapter (they probably realized they can make more money making a ELRS Micro module) to be used with TBS nano style transmitter modules and hopefully other nano…
made to be pressfit screws are passthrough so tpu is not inbetween the screw and the arm.
A redesign of the internals of the HP Elite/Pro Desk SSF G2 for more HDD space rather than using external drives. Requires removal of plastic holders for current caddy, which are easily removed with a small flat head screwdriver.…
I printed them 23cm tall with two perimeters, 10% infill
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! added GPS…
Standard and pants dressforms for 1/12 scale dolls! These were designed based on measurements for the Nendoroid doll bodies, because Good Smile publishes extensive measurements and those are also the ones I happen to own, but clothes for…
NEW VERSION (Now with optional 6x3 press-fit magnets so it doesn't fall off the spooler when loading, and an extended version for spools that are a little wider) I redesigned this specifically for the dual filament holder that I made from…
nazgul xl5 mount crossfire buzzer gps PS. Mogę wydrukować i wysłać na terenie Polski.
Tested on my HSKRC XL Frame (XL9 Arms), which is very close to the iFlight XL7. Standoffs in my case are 5mm (which could differ from the iFlight model), so the holes are tailored to that size. I added a TBS crossfire antenna holder to…
Getting into ISSF 10m Air Pistol, have glasses, and need a blinder? This is for you! Mocked this up quickly so I had something to cover my left eye, since finding 10m air pistol equipment is hard in my area. This is designed to fit my…
Figures working out, with ability hook for hangin on tree or something :). I made it as Christmas “workout style” decoration :).
Model inspired by metal tools. I was too cheap to buy a tool that I use only once every three years. The printed plastic version is not as durable. The first version broke while pushing out the second bearing but did the job. This version…
This is my latest version of my radiator bracket for Thermaltake Core series chassis. This one should allow you to mount a 360mm X-flow radiator between two posts of your Thermaltake Core P3. It should work on any side of the case you…
I wanted to make a set of these for my brother in law who owns a Crossfit Gym. The original set by @OldPixel is great but I wanted a slightly different shape for less rolling when tossing these on the floor at the gym and I changed the…
Hey, today only a small upgrade. I didnt like the loose "handle" for the Calibration pin, so i designed one with better grip and pressfit. The new one has a nice pressfit, just enough to not get loose. Also i gave it groove for more…
with TPU you can print without supports
I designed this simple part to help calibrate the cross fader on the DDJ-1000 controller. Using the service guide this will help to put the crossfader into the three positions needed for calibration. You can see the video at
This is an SRAM DUB bottom bracket installation kit. It's not necessary to buy a special and very expensive bearing installation tool to install the bottom bracket of your bike, I know that it looks better anodized in blue with a nice…
Crossflow turbine wheel for 4 spline axle - one like lego uses, printeble without supports If you can't produce high print quality I suggest checking the spline axle hole fittment before making a full height print and scale up or down in…
This is an adapter for the TBC Crossfire Micro and Full TX, which will fits right on your FrSky Taranis X-Lite. Wiring All you need to know, how to wire it up, you can find on my Blog: English:…
Clip-on glasses shooting blinder and diopter You'll have to drill the hole of the diopter , mine is 1.5mm Dioptre et cache oeil à monter sur lunettes. Vous devrez percer le trou du dioptre au diamètre que vous voulez.
I lost my last replacement nose piece for my Swissflex Eyephorics 2.5 Glasses. You know, the ones Jaime Hyneman wore on Mythbusters. Here is a good-fitting, comfortable replacement that I designed and printed on my Prusa i3 MK3S+ in…
Print with TPU, 3 layer walls
printed in TPU. I made this so my TBS crossfire antenna wires go underneath the two upright camera mount plates and your T antennas clip in. This is fit on my QAV-s Joshua bardwell edition, idk if the other versions of the frame will fit…
Thanks to StarrCycles for the inspiration. I started with his and modified for more strength and support for larger machine torches. I also added recess in the back for a couple of screws on the Z axis that stick out. it helps with…
Crossfire antenna mount. Print in TPU and mirror for other side.
Pioneer S9 crossfader external fader cap stopper by Flavour G'z Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.1 Infill: 100
This is a collection of upgrade parts I designed for my Langmuir Crossfire CNC plasma table: Strain relief anchor for Y axis motor cable Strain relief anchor for plasma torch and Z axis motor/switch cables Print Settings Printer:…
CNC Sheet Alignment Tool for CrossFire Pro by Langmuir Systems. All credit goes to the original author who produced this design to be cut out of steel on a CNC plasma table. This model is 3D print friendly and requires no supports. Two…
Bumper arriere Crossfire
Den Mantel und den Boden habe ich aus PC gedruckt und danach mit Felgenlack (transparent) beschichtet. Mittlerweile habe ich damit schon 10 Kerzen hergestellt. Das Wachs dazu habe ich aus dem Restwachs der anderen Kerzenstumpen…
Lock the fader in place if you don't need it, and entirely remove the risk of accidentally causing chaos. Tested on a DJM-S7 only. It should fit other mixers of the DJM range as well. Fader slot width: 55mm Fader knob width: 12mm
This is a 3D printed torch shield for the Langmuir Systems Crossfire CNC plasma cutter that uses a Hypertherm machine torch. It includes a holder for 2 inexpensive line lasers that will aid in material positioning under the torch. The…
If you have a CrossFirePower Milwaukee battery adapter on your Dyson V8 this will let you still use the wall mount that came with your vacuum. I printed mine flat-side down with no supports using Overture PETG in grey. I had to sand the…
This is a rear mount for both a BN220 GPS unit & a TBS crossfire immortal antenna to fit the iFlight XL5V5 frame (Drones such as the Nazgul5). Unlike others out there, this doesn't replace any of the existing parts. The rear frame bars…
An adjustable mounting solution for generic IPTM80 / PTM80 machine torch from Amazon to mount to the Langmuir Crossfire CNC Plasma Table. Also has mounting brackets for two straight line lasers for easier lining up of work piece.…
I designed this little mold in fusion 360, for candles.
Ця модель створена для візуалізації зовнішнього вигляду TBS Crossfire Lite TX. Ви можете легко використовувати його у своїх збірках і довіряти розмірам цієї моделі.
I needed new Humbucker Cover cause mine Broke. these just slide over the Pickups and fit snuck tight. maybe u need to scale up or down for ur pickups. just measure it. i print in PLA - 0,2 nozzle. with textured plate for finish look. no…
Cable Chain Nema 17 Mount for the 3018. Glue in the magnets and simply press onto the motor. You need 4 8x2.65 or thinner Neodyn Magnets
A simple replacement for the GEPRC crossfire immortal T antenna holder. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Saint Smart TPU Post-Printing ============= Category:…
Einfache Gussform von einem Dala Pferd. Gedruckt in Tpu
Antenna Mount for DJI O3 Air Unit + Crossfire Immortal Antenna. Credits: botgrinder & barontechnologies Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.3 Infill: 80 Filament: Sain…
FlySky FS-I6X extension dor Micro TX modul (Crossfire, ExpressLRS, etc) and external battery.
Inspired by the classic Crossfire game , I have created OpenFire, a modularly designed, up to 6 player take on the fast paced, tabletop marble hockey board game! With this redesign of the classic you can now compete against your whole…
Vielen Dank Sven Krause , dass du deine Idee mit uns allen teilst :)
Made specifically for the Raceface PF30 bottom bracket, but will certainly work with other PF30 BB's. Bearing removal still in progress! but you can use a disassembly cup to remove the bearings from the pulled out bottom bracket shells.…
Lens Covers/Caps for a Vortex Crossfire II 3-9x 40mm Rifle Scope The stock lens covers/caps do not stay in place and the elastic cord is defective over time. My solution was to design my own version of lens covers/caps that fit securely.…
This design is a Spotting Scope adapter for Iphone 15 Pro Max, with MagSafe cover. Designed for Vortex Crossfire HD 20-60x80A
Nassfutter Schaber für Katzenfutter zum ausquetschen, in 2 Grössen. Schlitzbreite 2mm und 1,25mm. Funktionieren aber beide perfekt.
A modification of rofatincool's Bearga barrel. Adjusted for better fit and higher power increases shot speed from about 10km/hr to about 20-25km/hr
Here is a mount I designed for the fpv and crossfire antennas for my mr.croc frame from flywoo. Hope you'll enjoy it!
Die Gussform wurde während eines Twitch Streams entworfen, modelliert und am Ende auch für einen Guss verwendet. Anleitung: Die drei Schalungsteile werden zuerst am oberen Rand mit den Spannringen verbunden und am unteren Rand zusätzlich…
Laser adapter for a Langmuir Systems Crossfire Pro CNC plasma table. Includes Ruggeduino laser controller schematic. Controller used is an industrial Arduino UNO from https://www.rugged-circuits.com/ The enclosure I used:…
Since the only flywheel cage options for the Fearless Fire were either incomplete or a full on brushless setup I decided to make my own. This is a simple 32.5mm crush cage designed for Pulsar flywheels. I went with the smaller flywheel…
New 3D-Printed Chalk Box – Prototype I’m currently designing a Chalk Box that’s perfect for grip training with gymnastics straps (Ringriemchen / Reckriemchen) , but also ideal for bouldering, CrossFit and weightlifting . Simply cut a…
I dislike arm protections that fixate the protection with the motor screws so i designed my own one for the aos5v2 as pressfit, tight and easy to install :)…
This is a modification of the LTT Screwdriver Case Bit Holder (8x3mm magnet version) from https://www.printables.com/model/372998-ltt-screwdriver-case. I found that with my Voron 2.4 using a klicky probe (which has strong magnets for…
can be print without support i used tpu you need a zip tie
This is a pressfit PTFE guide for SUNLU filament dryer. It uses a clip / collet to fix the PTFE tube. No drilling and no glueing is needed. Can be used for reverse bowden setup all the way to the extruder so the filament stays enclosed…
Simple friction fit turret cap for a Vortex Crossfire red dot sight. Printed with Elegoo PLA+ @ .18mm layer height with the top side of the cap facing the build plate with supports.
Mount for the rear Y endstop of the 3018 CNC. Is PressFit but 4 8x2.65 neodyn magnets also hold it
Pulled out the antenna and fold it for better storage. Use 2 zip ties through the hole (1mm) and secure the tbs crossfire antenna
Druck ohne Supports mit der Vorderseite nach unten
You can organize your gym equipment on the wall. I took a wood sheet and drilled the holes for the main bracket, but it can be printed as well. The hooks printed in 0,2mm layer height. Threaded inserts M4x10 melted in with a soldering…
Das Bild zeigt NUR die fertige Matritze Cal. 0.54 Sharps!!! Alle Maße metrisch (mm): Es werden O-Ringe (15 x 2,5 - 2 mal, 14 x 2,0 - 4 mal (für die Matritze Sharps Cal 0,54) bzw 13,3 x 2,4 - 3 mal (für die Matritze Smith Cal 0.50))…
support pour le crossfire tbs nano , compatible pour la frame Flywoo Mr croc se prend entre 2 entretoises centrales parfaitement ajusté a printer en tpu Category: 3D Printing
Tweezers for inserting q-tip/cotton swabs into. Cut off the ends and insert into the tweezer. We use these for cleaning fiberoptics, dipping them in alcohol then wiping clean the fiber.
Not too bulky. Just enough to grab or push with your thumb. Made out of PETG for Flexibility and Heat Resistant Use of a single #4 x 1/2" wood screw to clamp onto scope
I love the SL5 frame and this a nice way to fit the airunit into the small frame. I remixed the design a butchered a nother antennamount and crossfire aswell. Category: 3D Printing
Ein Schlüsselanhänger für ein Foto (35mm x 45mm) Bestehend aus 2 Teilen die einfach geclipst werden. Nicht verkleben! Bilder sind austauschbar. Als Schutzfolie habe ich eine Dickere Prospekthülle zurecht geschnitten und als erstes…
Bambulab Silikonsocke für Hotend Gussform: Entdecke jetzt die innovative Ergänzung zu meinem verbesserten Silikon Wischer – die Raketensocke! Die fortschrittliche Gussform wurde speziell entwickelt, um das Silikon präzise durch eine…
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! added GPS…
Herramienta para pressfit Shimano SM-BB71-41A. Se necesita una varilla de 8mm, tres tuercas y dos arandelas. Imprimir con 4 capas de perímetro y relleno 40%.
The Crossfire antenna mount is designed to fit the ImpulseRC Echo without the need for glue or additional parts. Print settings: Material - TPU Infill - 30% Walls - 3 Supports - None
The easiest way to use them is to do an EMOM with the exercises. Enjoy your random WOD. 😁
I designed this tool based on the measurements of a Shimano Pressfit SM-BB71-41B. It might also work for other models, but I recommend checking the dimensions and making adjustments if needed. You will need few hardware parts: 1x This…
Intro Need to get fit fast? Just jump faster with this speedy ball bearing enabled jump rope! Need to make your kids tired asap? Let them jump more within less time with this speed jump rope! Dimensions The handles have a diameter of 28Ø…
I created this CrossFit model as the ones I saw online were all in kilograms and my friend wanted one with weight plates in pounds that matched the colors used in her gym. The bars are made from a 3/16" dowel (sharpied black), which costs…
Just bought a Crossfire and didn't find the existing protectors/stands to my taste. Printing them was too much of a hassle and using screws with 3D printed parts has rarely worked out for me. What's more, I'm not sure the other stands fit…
This is an old design that I imported from my prints on Thingiverse. This is a remix from the parts needed to install a bottom bracked from https://www.thingiverse.com/thing:2303747 I made this to install a Sram GXP pressfit bottom…
TBS Source One V5 TBS CrossFire Immortal T Antenna Mount
Rane TTM ve Sixty Serisi Fader Taşıyıcı (raylar üzerinde kayan) plastik olduğu için kırılan parçanın metal ve plastik versiyonları ve küçük bir kaydırıcısı var.
Crossfader lock for the ALLEN & HEATH XONE:23 to prevent accidental moves and ensure stable control during live performance, likely fitting other XONE mixers as well. Printed with MK 3.5S
[EN] To be able to remove the small neodymium magnets from the fridge with bare hands I designed this small housing. Because of the conical design it is very easy to grab the magnets. The tight tolerance keeps the magnet in the housing…
I designed this tube to transform a normal TBS Crossfire Micro antenna into an Immortal T. Things needed for the build: T printed in TPU micro antenna two 3mm diameter tubes about 80mm and 72mm in lenght. a zip tie To assembly the…
This is a model for organizing your electric toothbrush and cable. Or Sockets are over and aside the sink and the cables were rather hangin down and could get wet etc. I mounted it with double sided tape. You can cut the model in your…
Ich arbeite vorwiegend mit den E3D Revo 0.40'er und 0.25'er Düsen. Beim Reinigen der Düsen wechsle ich meist die Silikonsocke. Leider sind die Socken nicht einzeln sondern nur im Set (0.25, 0.40, 0.60, 0.80) erhältlich. Aus diesem Grund…
Here is my modeling for push-up bar that allow for greater amplitude and less wrist pain. The model is in 2 pieces in order to limit the supports which are not even necessary. The 2 pieces then fit together, you can glue them together but…
The aperture and the aperture holder are printed with a layer height of 0.2 mm. The aperture consists of three layers and is still sufficiently translucent in white. The aperture holder is printed with 80% infill at a layer height of 0.2…
mount designed for a baby ape pro drone but compatible with multiple other drones that have the same 20mm spacing between the two holes. printed in fiberlogy fiberflex 40D no supports, meant to be folded. you can't use stiff filaments
ISSF - International Shooting Sport Federation - Male Shooter 3D printable model.
Nice Crossfit one-wheel keychain, this project is split into two halves to glue it with super glue, this way it doesn't need supports, I hope you like it Bonito llavero de Crossfit de una rueda, este proyecto esta partido en dos mitades…
USSF Stars & Stripes – USA National Soccer Crest (Bas-Relief Edition) : World Cup 2026 Ojibwe Clan Animals & Cultural Significance The turtle, eagle, and bear are deeply sacred figures in Anishinaabe (Ojibwe) tradition, prominently…
Vhorlath Realms – Season II: Shadowed Empires The Abyssfire Demon Lord is a commanding winged demon ruler, shaped for dark fantasy settings where raw power, infernal authority, and centerpiece presence matter. With vast bat-like wings, a…
A modification for the Langmuir Crossfire Pro to use garden hoses (without couplers) for draining the table. Uses ½" garden hose and clamps (example: https://www.amazon.com/dp/B0006JLSNI?th=1 ). Make sure to retain the rubber o-ring and…
