1 / 3
Micro / Tiny Whoop Drone Propeller Puller
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Micro / Tiny Whoop Drone Propeller Puller
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 35
- Makes
- 1
- Views
- 455
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Here’s a little tool to make swapping out your micro / tiny whoop drone propellers a whole lot easier. Just hook under it and give it a pinch. There is a center plunger file for Ø1.0mm and one for Ø1.5mm. I used the metal puller that came with my Flywoo Firefly18 and it’s held in place with an M3x10 and an M3x6. You’ll have to round up something for the pin. I used a broken off drill.