Modular light display for aquariums -= DISCONTINUED =-
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular light fixture for aquariums, from 20cm to infinity ;P -= DISCONTINUED =-
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial
-= 03/12/2025 =-
-= DESCONTINUADO =-
Pantalla de luz modular para acuarios, desde 20cm hasta el infinito.
Imprimir en PET-G, ABS, ASA, PC o cualquier filamento que soporte temperatura.
Tornillería M3x5 M3x7 M3x10 e insertos M3x5
Se recomienda pegar las piezas que no se van a desmontar nunca, dejando la tapa latera con orificio para el cable sin pegar para futuras reparaciones, ampliaciones, etc...
Necesario un placa de aluminio de 905mmx130mmx1mm y metacrilato transparente/translucido (o similar) de 905mmx130mmx2mm.
Recomendable colocar 2 varilla de 5mm de diámetro y 910mm de largo para reforzar la estructura.
-=05/12/2025=-
Añadido reductor para cable de 3mm.
Proyecto en construcción.
-= 03/12/2025 =-
-= DISCONTINUED =-
Modular aquarium light fixture, from 20cm to infinity.
Print in PET-G, ABS, ASA, PC, or any heat-resistant filament.
M3x5, M3x7, and M3x10 screws and M3x5 inserts.
It is recommended to glue the parts that will never be disassembled, leaving the side cover with the cable hole unglued for future repairs, expansions, etc.
Required: an aluminum plate measuring 905mm x 130mm x 1mm and a transparent/translucent acrylic sheet (or similar) measuring 905mm x 130mm x 2mm.
It is recommended to add two 5mm diameter, 910mm long rods to reinforce the structure.
-=05/12/2025=-
Added reducer for 3mm cable.
Project under construction.