Universal electronics enclosure – flat front & back panels

This is a simple universal electronics enclosure for various DIY projects. I currently use it for a small audio amplifier – power switch, volume knob and LED on the front – but the design is intentionally very generic, so you can reuse the box for many other things (controllers, Arduino projects, small power supplies, etc.). Dimensions: - outer size: 120 × 100 × 50 mm - inner usable space: 112 × 90 × 42 mm The model consists of: - two identical main parts (bottom/top – you print the same part twice) - flat front panel - flat back panel Top and bottom are exactly the same model, so there is only one STL for the main body – just print it twice. Both the front and the back panel are completely solid in the base model: - you can drill the holes exactly where you need them (switches, potentiometers, jacks, LEDs…), or - you can modify the panel models and print your own front/back with custom cut-outs. All parts are designed to be printed flat on the print bed and without supports. The box closes by sliding/clipping the two main parts together with the panels (see photos). Feel free to remix the panels for your own layout and share your makes 🙂