Part to make your TBS Mojito NOT FLY OUT OF THE SKY LIKE A BRICK
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Do you have a TBS Mojito FPV wing? Please check this print out to keep it in one piece! :D
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 138
- Makes
- 0
- Views
- 589
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
The TBS mojito FPV wing has some issues... Especially in the connection of the wings. These parts are designed to:
Solve issue of wrong connector engagement (spacer)
Solve issue of wing detaching with turbolence or vibrations
The wing latches MUST contain a HEX nut that should be inserted mid-print with a pause. Please print them standing as they will be used in the wings. You will see the hole for the nut in your slicer :)
When gluing the TAB in the fuselage please use an exacto knife to start the hole and then dry test fit it without glue. Draw a line on how deep it should be inserted and only after glue it in.
