*updated* Tennisball raiser for front wheel on indoor trainer (25mm to 45mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raise the front wheel for your indoor trainer, the same way as the back.
- Rating
- 3 / 5
- Likes
- 24
- Downloads
- 233
- Makes
- 1
- Views
- 1,169
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
On my Wahoo Kickr Core, mounted on Tennisballs, I always felt that my hands have a lot more stress, as on the street. After a bit of thinking it was clear to me that I raised the backend by about 50% of the height of a Tennisball, but not the front.
I know there are a lot of static front wheel mounts, but if I have Tennisballs on the back which can move in all directions, I didn't want the the front static wheel mount to rub over my floor, or limit the Tennisball movement with rubber under the front mount.
Therefor I designed this.
Fitting Tennisball raiser for the Wahoo Kickr Core can be found here.
See the updates in the differences section below!
Print notes:
I printed it with 0.4mm nozzle MK4S 0.28mm Draft Profile, Snug Support everywhere and 10% gyroid infill, using PETG, but PLA should also be fine.