1 / 5
Keihin PD Carb Choke Arm And Cover Dust Cap for 1977 Honda XL350 — image 1
1 / 5

Keihin PD Carb Choke Arm And Cover Dust Cap for 1977 Honda XL350

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement choke arm for the Honda XL350 and likely others with a Keihin PD Carb

Rating
0 / 5
Likes
1
Downloads
7
Makes
0
Views
79
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Share Alike

About

I bought a fancy metering rod carb for my bike, but it wasnt working right. The stock one worked mostly fine other than the choke no longer working. 

I dont know why keihin used plastic choke arms and failed to make a replacement part for these. They change slightly over the years from metal to plastic to varying revisions of plastic. 

When I got this bike I lacked the knowledge to make this part over again and thought about how I needed to be careful or I risk ruining it permanently, but now we can just make copies. 

Its apparent why the thing would fail either in the spring mechanism or the knarp holder.

Printing

I printed this from Polymaker Fiberon PETG-CF08. It seems more than sufficient, but also have a backup made in polycarbonate.

I should think any filament more substantial than PLA would last a long time here, heck, even PLA might be fine, but it probably gets warm enough behind the engine to melt it. 

You should plan to run a bunch of walls, to basically fill up the whole model, or do 2 walls alternating with solid 100% infill. 

The tolerances are pretty tight on this thing, so if havent done flow calibration and pressure advance calibration, its probably not going to fit well. Even then, I had to trim a little of the seam out in the center. 

Additionally, you can sand/polish the arm just a bit and apply a little grease for proper snappy action. 

If you have questions let me know. If you found this and you dont have a printer, leave a comment or message me, and I can send you a couple printed out for shipping and a few bucks!

Tags