1 / 6
Arduino Uno R4 Case (Snap Fit)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Simple Snap Fit Case for the Arduino Uno R4!
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 104
- Makes
- 2
- Views
- 298
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
This is a simple snap fit case i made for the Arduino Uno R4 in Onshape! It is modeled after the GrabCAD 3d model here https://grabcad.com/library/arduino-uno-r4-wifi-1 with .15 mm tolerances. Connectors have bigger tolerances because of cable sizes. All leds have holes to make them visible outside of the case. There is also a flap that pushes down on the reset button!
Supports are recommended for a clean look, but is not required. 0.2mm Layer height and 15% infill.