1 / 1
Manual Z-height adjust square 50x50mm with L-corner orientation mark — image 1

Manual Z-height adjust square 50x50mm with L-corner orientation mark

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Another square to adjust z level I made for my Prusa MK3s and MK2.5; L-Mark as hint for orientation after removal

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
25
Reviews
0

Updated at source:

Model information

Category
Test Models
License
Creative Commons — Public Domain

Just another square to manually adjust the Z-level. Nothing special, just a small square, prints quickly.

The indicated "L" points to the lower left corner. Makes it easy to identify orientation after you removed the print.

Different version to match with your nozzle size and resulting layer height. Please note that first layer thickness often differs from layer setting in the slicer. For my Prusa MK2.5 with a nozzle 0.8mm and 0.4mm layer height the first layer is 0.3mm only.

Tags