Raspberry Pi 5 High Quality Camera Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
RPI 5 case and mount for the HQ camera
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 84
- Makes
- 0
- Views
- 392
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Raspberry Pi 5 case with mount for the High Quality Camera and lens. Case height accommodates a Pi Sugar 3 Plus attached to the back of the Raspberry Pi board and active cooler/heatsink.
Picture: RPI 5 + Pi Sugar 3 Plus + Active cooler + HQ Camera + 16mm lens.
Features
Ventilation cut outs provided for the heatsink and fan of the official active cooler.
Camera ribbon can be run inside (hidden), or outside the case, without needing to create permanent bends.
Cut outs for IO ports and USB powers.
Case height fits Pi Sugar 3 Plus and Raspberry Pi active cooler.
Hardware
4x M2.5 x 10mm for mounting the camera board
4x M3 x 8mm for camera mounting to case
Optional 4x M2.5 and 4x M3 nuts if you want a more secure fit.
Tips
The Raspberry Pi 5 can get a bit toasty, so PETG or ABS is recommended (especially if being used outside).
Supports required for the IO cutout (tree, auto worked fine for me).