Airbrush Spray Grate for Miniatures & Model Parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small 5" x 5" grate with 3mm square holes for airflow.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 40
- Makes
- 0
- Views
- 157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This airbrush spray grate is a raised platform designed for painting small parts, miniatures, and model components.
The perforated grid lets overspray pass through instead of pooling, while the elevated surface improves airflow and access from multiple angles.
Great for priming, basecoating, and clear coats without parts sticking or collecting paint blobs underneath.
Included with the grate are modular offset pegs (5 mm × 15 mm body with a 2.8 mm insertion peg) that slot into the square holes. Use them as painting offsets, temporary part supports, or light-duty bench dogs, basically whatever helps keep tiny parts where you want them instead of skittering off mid-spray.
Tolerances are set to ~0.2 mm, so this should work reliably on most FDM printers
The base features cutouts along the sides, making the platform easier to grab when your hands are painty, gloved, or just tired of fighting smooth plastic. You can hook a finger or tool into the cutouts to reposition or lift the stand without smearing fresh paint everywhere.
Printing.
Print the grate mesh-side down, and print the pegs with the wide end on the build plate.
No supports required—just print it, spray it, and get on with your project.
