1 / 4
BentoBox v2.0 module using Bambu Lab X1C / P1P / P1S filter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BentoBox module that can accomodate filters from Bambu Lab X1C / P1P / P1S
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
modified the filter enclosure to use a filter from the X1C / P1P / P1S (example https://aliexpress.com/item/1005008346677344.html) as i had a couple on hand, also i used 5x2mm magnets instead of the standard ones (same reason)
the top of the module is held by the magnets and can be easly removed to swap the filter, the fit is quite snug but i may add someting like a tpu gasket to further block any possible leaks in a future revision
just be note due to the size of the filter this module protrudes half a cm both front and back