1 / 2
Selected 5.5 pellets tray
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tray for selected pellets 5.5 for a pellet can
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 43
- Makes
- 0
- Views
- 261
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
A tray for selected pellets 5.5 for use in a empty can of JSB Exact Jumbo 500 unid. of 9,5 cm. diameter. 120 pellets (2 trays, 240 pellets selected in a can).
Printed in PLA with a 40% infill density. The tray must be printed with the following settings on your Orca slider: Infill pattern spacing: Gyroid, Wall loop = 1, top shell layer = 0 and bottom shell layer = 0.
To make handling the pellets easier, you can remove the plastic burrs from the holes with a 6 mm drill bit.