openGrid Magnetic Tool Rack Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
OpenGrid compatible mount for magnetic tool holders
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 270
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of a magnetic tool rack holder originally designed for Skadis, now brought over to openGrid! Uses the KYZ Design snaps; print two rings per snap and insert into the pockets on the snap. This provides a very robust hold which is needed to support the weight of both the magnetic strip as well as the tools attached.
The bracket is sized to fit a magnetic tool holder that is approximately 23 mm by 13 mm in cross sectional area. Measure your magnetic tool holder before printing to check if you have the similar dimensions! I used this U.S. General 18 inch holder available at Harbor Freight: https://www.harborfreight.com/18-in-magnetic-tool-holder-60433.html
I recommend printing this in PETG for the added strength and flexibility at 20% infill. It should be slightly snug. I ended up printing four mounts to hold my magnetic tool holder in place.