Hanging Lamp With Compact Connectors
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.36 – €0.44 net (excluding VAT)
For file: Peg_0.4n_0.2mm_PETG_MK4SMMU3_25m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.40 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 25.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A Hanging Lamp with Compact Connectors that are used to connect multiple Segments to a Connecting Base without glue.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 9
- Makes
- 0
- Views
- 70
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- GNU General Public License v2.0
A Hanging Lamp with Compact Connectors that are used to connect multiple Segments to a Connecting Base that also houses a E27 lamp socket. This assembly can be snapped together, so no glue required.
This design integrates with the Compact Connector (see https://www.printables.com/model/1567386-strong-compact-connector). If needed a clamp can be used to press parts together as it is a tight (but very strong) fit. Hope this model inspires others to design multi-part models.
There are four types of components that are all printable (the number 8 is a suggestion):
1x Connecting Base.
8x Segments.
8x Pegs.
8x Cover Caps.
Notes
A Peg is recessed in the Connecting Base on one side. Each pin of a Peg has a so called beard that sticks out. The Cover Cap is used to hide them and for decoration.
The pictures show how the lamp can be customised by adding more Segments. If required all positions in the Connecting Base can be occupied.
The Gyroid infill really comes into its own when transparent filament is used.
Printing
Top Fill Pattern: Concentric.
Bottom Fill Pattern: Concentric.
Fill Density: 10%.
Fill Pattern: Gyroid.
Support: Very limited.
Filament: PETG for the Compact Connectors as it is less brittle than PLA so it can better withstand the forces when the pins of a peg are squeezed. Also, consider transparent filament just for the looks.
Assembling
The images depict how everything fits together. Please note the recess that shoud hide one side of the Peg in the Connecting Base.