UNIV Laptop Charger Mount - V1.1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The UNIV (universal) laptop charger mount is a small device meant to hold up your charging brick neatly under your desk.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Now out of beta, the Universal Laptop Charger Mount is used for mounting underneath your desk using screws, and velcro straps to attach charger to mount.
PRINT SETTINGS:
Recommended to beef up the infill near the screw holes
15% Infill and 3 Perimeters
Print in ABS or PETG if charger doesn't heat up much.HARDWARE:
M4 Screws (needs to be longer than 5mm)
Velcro Straps (keep width in mind)NOTES:
Be careful when drilling in screws, otherwise the screw may go through the plastic and damage the mount.
CHANGELOG FOR V1.1:
Changed screw type to M4, as M3 screws were easier to strip under the load of a drill.
Removed the modifiers.
Removed mention of modifiers in description.