Pixhawk GPS mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Robust, reliable, 3D printed GPS mount for your Pixhawk puck style GPS!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 59
- Makes
- 0
- Views
- 224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Why print this?
I was previously using AliExpress folding GPS metal mount but I found out that it was oscillating. I also noticed that the double sided tape went loose after a few flights. My design is rigid enough to prevent oscillation or even tip overs on the mount. It has a slot for attaching the GPS puck with a medium sized zip tie. I used both double sided tape and zip tie. It is not foldable but gives a shorter option if height is an issue.
Recommended print settings:
Use raft, sufficient cooling to prevent dripping on the top cone, slow down (or minimum time per layer setting) and Z-hop at the top 30mm. No supports required.
Recommended print:
My favorite variant that you can also see in the pictures on ZD550 V1.2 frame is D40-L100 (D refers to the diameter that the GPS puck mounts on, L is the total Height of the mount).