1 / 4
2018 GMC Yukon Denali passenger side mirror cover — image 1
1 / 4

2018 GMC Yukon Denali passenger side mirror cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

2018 GMC Yukon Denali passenger side mirror cover

Rating
0 / 5
Likes
1
Downloads
30
Makes
0
Views
223
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

The little clamp on my passenger side mirror cover broke, a replacement visor is $200, so I took some time, and designed this, printed out of ABS and it works. You need to add some conductive tape to the tab in the middle (see the factory one) so it closes the circuit when flipped up and the lights turn on. This is a great tutorial how to take the sun visor apart: https://www.gmfullsize.com/threads/how-to-nnbs-visor-disassembly.217057/ But for replacing the cover, just slide it up in closed position, and it should pop out. Attaching the new one, just do it in reverse. I used a screwdriver to gently pry it on, so the tabs don't break. It should fit all the models that share the same sun visor, but my car has a sunroof, and that sun visor is a bit different. I didn't check if it fits the driver side, but I assume it would, maybe you need to mirror it. Give it a try :-) Strongly recommend ABS or ASA, as the car interior can get hot! Print it in a 45 degree angle, enable supports (on top of the added one) for stability.

Printed on a FlashForge AD5X (with enclosure and HEPA Duct mod)

Print settings:

  • 0.4mm nozzle, 0.20mm layer height

Quality:

  • Walls printing order: Inner/Outer/Inner

  • Print infill first

Strength:

  • Wall loops: 5

  • Alternate extra wall

  • Gyroid infill at 15%

  • Ensure vertical shell thickness: Moderate

Support:

  • Enabled, Tree, Tree Slim

  • Top Z distance: 0.3mm

  • Bottom Z distance: 0.3mm

  • Base pattern: Hollow

  • Support/object xy distance: 0.5mm

  • Support/object first layer gap: 0.4mm

Other:

  • Brim: Auto

Tags