Counting matching models…
I bought a Harbor Freight Yukon 60in hardwood workbench for my 3D printer (don't let the raggedy/abused floor models fool you - the drawers work smooth and the bench is sturdy). It was on a great sale and it fit well in the walk in closet…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Name tag for my late Siberian Husky - Yukon. Raised border, mountain range and his name on the front. Back side would have my phone number instead of X's.
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Yukon Cornelius : Rudolph the Red Nose Reindeer
Print approx. €6.01–€7.35 excl. taxPreliminary estimate for one variant
This is a repair part for your GMT800 front door arm rest clip. The door switch panel clips into it. The originals are prone to breaking with age and then the switch panel flops around. Print in ABS or PETG for heat resistance. Printed…
Small remix of rear seat cupholders for 2015-2020 GMC Yukon/Chevrolet Tahoe, I added a GMC, Denali, and logo-less version. Enjoy! (Better pictures coming soon) Print Settings: eSun Black PLA+ filament 210/65 C 0.20 mm layer height Leave a…
WIP Set of files, will update as I fix it.
This part helps repair the front post on higher optioned LT models that can break if the rear clip fails. Not all models use this front bolted post from the bottom. Print from ABS/PETG solid for strength. Will need to use supports and put…
This is Yukon Cornelius from Rudolph the Red-Nosed Reindeer! You can gift it or just make it for personal use. Some other possibilities include mounting it in a frame, or tacking it on the wall. The possibilities are up to you! The…
I loved the original design, but with my seat backs, the lip was just a little too short to hold up when hitting bumps. And once I started modifying it, I went a little further and upgraded the design a bit! These are pretty easy to…
Slips over the ends of the rear seat bar and adds about an inch to the height of the seat in the rear. Should be printed with PETG or another filament that's durable in full sunlight. I used 50% infill and the strength has been fine.
The greatest prospector in the North! This is a detailed fan-art tribute to Yukon Cornelius . This sculpt captures the rugged adventurer in a classic moment: holding up his pickaxe to inspect it after a taste test. Is it gold? Silver? Or…
Improved switches for player board in Yukon airways boardgame Print instructions Category: Toy & Game Accessories Summary Improved switches for player board in Yukon airways boardgame Print Settings Rafts: Doesn't Matter Supports: Doesn't…
Basic Gridfinity baseplates for Harbor Freight Yukon 20in. 3 Drawer Toolbox top and drawers split up to fit on MK3/MK4 build sheet. I used this Gridfinity Baseplate Calculator and OpenSCAD for the top baseplate and the Fusion 360 plugin…
Gridfinity baseplate for Yukon 48 inch workbench . It's a pretty snug fit with minimal movement using the Gridfinity Generator. An 8U bin will take you to just under the sidewall height but can accept up to 10U using the gap between the…
The workbench spool holder is sliced and printed on 2 plates. One will be the spool holders, and the second is for the base and guides. All Items were glued to the base using SCIGRIP 16 Fast Set found here https://a.co/d/bARwUPY The spool…
These prints are to install the Atoto USB ports into the dash of a GMT800. They use the original cubby if so equipped. The dash face plate easily pops off (see youtube) and you can remove the cubby by removing the M8 headed screws. The…
Remixed to allow more space for the drawer latch to function. Also made the pieces snap together.
The little clamp on my passenger side mirror cover broke, a replacement visor is $200, so I took some time, and designed this, printed out of ABS and it works. You need to add some conductive tape to the tab in the middle (see the factory…
Super easy and fast print of Yukon Cornelius in Blokkheadz form. No supports or AMS required at all. Included is an hanging ornament option as well. See the images for assembly. Come join my Discord :) https://discord.gg/tsJahEYA
Needed a hanger to hold the heat gun without storing it away. it uses the bolt holes for the handle on the right side.
This model was a commission to cover the post and bolt hole left after removing the armrest from a 2010 Chevy Suburban. A couple iterations landed on this design for ease of printing and the lowest possible profile, with 1mm of solid…
These risers are designed to lift the Yukon 60inch woodworking table from Harbor Freight 2 inches up so that 5 gallon Commander Totes can fit under the shelf. Through holes added for targeted strength, there are some holes in the front…
Picked up a HF Yukon cabinet for setting my Voron 2.4 350 on. It was just a little shallow in depth so I designed these to bolt to the back so the rear feet would have something to set on. The side with the bevel in the middle face aligns…
This is a simple paddock stand holder for the Harbor Freight Yukon 5 tier shelf. There is no mounting hardware required. Print on it's side with support. I printed in PETG with tree support.
Replacement rear cargo side-compartment latch for 2007–2014 GMT900 Chevrolet Tahoe, Suburban, GMC Yukon, Yukon XL, and related Cadillac Escalade models. This is the small plastic latch used on the left-side rear cargo-area storage/cubby…
i needed a shelf in a basic safe, so i used the hooks for the rifle foam holder and designed a shelf around them. I needed 3 hooks, and 10 stretchers of each lengths. STEP files are attached so feel free to adjust as needed
Just a mod to hold the referenced PTFE coupler. Pretty custom to my setup, but I was asked for the model so posting. If you can use it, great! Feel free to remix!
This mount attaches using the existing hardware from the top shelf your Harbor Freight Yukon workbench to allow you to use the Filler filament spool holder to give you a sturdy spool holder without taking up any shelf or workbench space.…
Wanted to add some flair to my wife’s GMC Yukon Denali—the engine compartment side of the hood. Open most vehicle hoods; they’re complete with an array of manufacturing holes. Some manufacturers plug these holes, whereas others do not. In…
A mount for a Furman SS 6B power strip on the side of a Harbor Freight Yukon 48in Workbench with light
I found an old Burton magnifier light with a missing bracket. I wanted to fit it into the holes in a Yukon work bench from Harbor Freight, so I made an adaptor to fit the two together
I designed to adapt a harbor freight 36 inch toolbox with softclose drawers to use leveling casters. this makes a great 3d printing toolbox that is completely level and fits over 20 rolls of filament perfectly in the bottom drawer and…
These risers are designed to lift the Yukon 60inch woodworking table from Harbor Freight 2 inches up so that 5 gallon Commander Totes can fit under the shelf. Through holes added for targeted strength, there are some holes in the front…
The little clamp on my passenger side mirror cover broke, a replacement visor is $200, so I took some time, and designed this, printed out of ABS and it works. You need to add some conductive tape to the tab in the middle (see the factory…
Just a mod to hold the referenced PTFE coupler. Pretty custom to my setup, but I was asked for the model so posting. If you can use it, great! Feel free to remix!
Yukon Cornelius | Rudolph the Red Nosed Reindeer
Yukon Cornelius version 2 | Rudolph the Red Nosed Reindeer
2015 - 2020 Tahoe/Yukon/Escalade Models Service Manual + 3d print chapstick holder
This is a 3D scanned model of the front tow hook cover vent grille for a 2010 GMC Yukon. The geometry was captured from an original OEM part to replicate the factory form and mounting features. The model is intended for replacement of a…
