1 / 1
3x AAA battery cartridge to 18500 adapter for compact LED flashlights — image 1

3x AAA battery cartridge to 18500 adapter for compact LED flashlights

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Use a single 18500 cell in place of a 3xAAA cartridge for compact flashlights

Rating
0 / 5
Likes
4
Downloads
18
Makes
0
Views
165
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Li-ion /LifePo4 safety warning

  • For use with “protected” cells only. Unprotected cells can be discharged too much making them hazardous when re-charged.

  • Some flashlights are sealed tubes with o-rings at each end. In the worst-case scenario, a failed 18500 cell can discharge up to ~4 liters of gas. If the o-rings don't release some gas, then the cap will pop off violently when you go to replace the cell potentially causing serious injury.

  • To mitigate these risks, consider removing one or both o-rings if present. Without o-rings, the aluminum threads of cheap flashlights are more susceptible to corrosion, so keep the flashlight away from moisture.

Intro

Many compact multi-LED flashlights (usually 10x 3mm LEDs) use a cartridge with 3x AAA batteries for 4.5V with alkaline or 3.6V with NiCd/NiMh. These flashlights have a voltage regulator that makes them very forgiving on the input voltage and usually work anywhere from ~2.75V → 5V.

So I made an adapter to help fit an 18500 LifePo4 3.2V battery as a I had a few extras from a project. Will also work with the less popular 18500 3.7V Li-ion cell.

Printing

Print with a 3mm outer brim. PLA or PETG OK.

CAD

The model is a simple tube with an 18.75mm inner diameter, 22.5mm outer diameter and 48.5mm height. The ends are chamfered for easier fitment.

Tags