1 / 3
Raspberry Pi 4 + Gert VGA 666 case With screws holes for 40 mm fan — image 1
1 / 3

Raspberry Pi 4 + Gert VGA 666 case With screws holes for 40 mm fan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix of the original model from Makoto_Doushite with a bigger hole for the 3.5mm jack conn. and some more improvements.

Rating
5 / 5
Likes
3
Downloads
17
Makes
1
Views
123
Reviews
1

Updated at source:

Model information

Category
Video Games
License
Creative Commons — Attribution — Share Alike

Use the files from the original model from Makoto_Doushite, but replace the top of the case with this one. To close the case, I used:

  • Two M2.5 x 25 countersunk head screws.

  • Two M2.5 x 10 countersunk head screws.

You can optionally also print two turrets. They must be placed between the VGA666 PCB and the RPI4 PCB, with the M2.5 x 25 screw going through them (as shown in the last photo).

FreeCAD files are included to ease remixing.

Tags