First Layer Test - Quick 5 squares (100/200/300 mm) Calibration
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Five 0.2 mm first‑layer squares for 100, 200 and 300 mm beds. Quick to print and simple to scale.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 267
- Makes
- 0
- Views
- 402
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial
This set includes three fast first‑layer quick‑test plates, each with five simple squares for rapid adhesion checks and Z‑offset tuning.
Each plate is 0.2 mm thick, giving you clean single‑layer patches that print quickly and clearly show first‑layer quality across the bed.
Included sizes:
• 100 × 100 mm — for small printers and mini beds
• 200 × 200 mm — standard size (Ender‑3 class, K1 series ++)
• 300 × 300 mm — for larger printers (CR‑10, Voron 2.4 300, etc.)
The models are intentionally minimal: just five flat squares placed at key points — four outer positions plus the center — making them ideal for quick checks without running a full‑bed test.
Scalable:
You can freely scale the models in X/Y to match any bed size.
You can also scale the model in the Z‑axis to match any specific first‑layer height (for example 0.1 mm, 0.12 mm, 0.28 mm, etc.).
For full‑bed coverage, check out my 120/220/320 mm first‑layer test — you’ll find it on my profile.