Clamp Wall Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spring-loaded wall spool holder with integrated brake and smooth bearing rotation.
- Rating
- 4 / 5
- Likes
- 5
- Downloads
- 21
- Makes
- 0
- Views
- 135
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Clamp Wall Spool Holder
This spring-loaded wall-mounted spool holder is designed to securely hold standard 1 kg filament spools while allowing smooth and controlled rotation.
The triple Grip Arm system provides strong radial clamping force, while the integrated axial bearing and brake mechanism prevent unwanted free-spinning. This ensures clean filament feeding without spool overrun.
Features
Triple spring-loaded Grip Arm system
Integrated spool brake (anti free-spin)
Axial thrust bearing for smooth rotation
Easy spool installation and removal
Compact and strong mechanical design
Hardware Required
2× F688-R2 Bearings
1× F8-22M Axial Bearing
1× 6 mm Steel Ball
4× 20 × 6 × 0.6 mm Springs
1× M8 × 90 mm Bolt
1× M8 Grip Nut
TPU is used for the grip inserts.
Print Settings
Material: PLA / ABS / ASA recommended
Layer height: 0.2 mm
Infill: 40%
Walls: 4 perimeters
Supports: Not required
Assembly Notes
Do not use TPU for the locking filament pin.
Ensure the wall mount is securely fixed to a solid surface.
Use proper wall plugs depending on your wall type.
Use a thin card to hold the brake ball in place during final assembly.