DogCat – Horror Collectible
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DogCat is a high-detail, two-headed horror collectible designed to look like a premium vinyl-style figure once it’s done
- Rating
- 0 / 5
- Likes
- 12
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
DogCat is a high-detail, two-headed horror collectible designed to look like a premium vinyl-style figure once it’s cleaned up. It’s an extremely detailed 3-color AMS print, so it takes a little extra time — but the result has serious shelf presence.
3-Color Setup (AMS):
White = eyes/teeth · Black = pupils · Any color = body
Supports / Cleanup:
Tree supports required. The only tricky part is removing supports around the teeth and inside the mouth. I strongly recommend needle-nose pliers + flush cutters. My cleanup workflow: clip supports, pull with pliers, then use a small screwdriver to pop supports loose inside the mouth. Optional: light sanding + a gentle 5–8 second heat-gun pass over sanded spots to blend the surface.
Print Profile:
0.4mm nozzle · 0.2mm layer height (0.16mm if you want extra crisp detail) · Tree supports ON · Brim recommended · 3 colors (White/Black/Body)