DogCat – Horror Collectible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DogCat is a high-detail, two-headed horror collectible designed to look like a premium vinyl-style figure once it’s done
- Ocena
- 0 / 5
- Polubienia
- 12
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
DogCat is a high-detail, two-headed horror collectible designed to look like a premium vinyl-style figure once it’s cleaned up. It’s an extremely detailed 3-color AMS print, so it takes a little extra time — but the result has serious shelf presence.
3-Color Setup (AMS):
White = eyes/teeth · Black = pupils · Any color = body
Supports / Cleanup:
Tree supports required. The only tricky part is removing supports around the teeth and inside the mouth. I strongly recommend needle-nose pliers + flush cutters. My cleanup workflow: clip supports, pull with pliers, then use a small screwdriver to pop supports loose inside the mouth. Optional: light sanding + a gentle 5–8 second heat-gun pass over sanded spots to blend the surface.
Print Profile:
0.4mm nozzle · 0.2mm layer height (0.16mm if you want extra crisp detail) · Tree supports ON · Brim recommended · 3 colors (White/Black/Body)