Tronxy X5SA Pro Z Axis Spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This spacer was created to be printed without supports. This is meant to be put in the two holes near the Z axis…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 49
- Makes
- 0
- Views
- 555
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This spacer was created to be printed without supports. This is meant to be put in the two holes near the Z axis thread rod. The spacer goes around the bearing at the top of the axis making it flush with the frame.
When making your Z axis even, be sure to remove the spacers before homing the Z.
I use Klipper and homing the Z moves the bed down before homing the X and Y. This is when I remove them. If you do not remove them, they will hit when the Z is homed.
Print Settings
Supports:
No
Filament:
ERYONE PLA
Matte Green
Notes:
Print with the alignment rods facing up.
Category: 3D Printer Accessories