Magnetic Pet / Cat / Dog Feeding Tracker - Rotating Dial Fridge Magnet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple rotating tracker to keep track of your pet’s last feeding time.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 1
- Views
- 106
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
General
A compact pet feeding tracker designed to prevent accidental double feeding.
(Unfortunately for many pets ;-) )
Simply rotate the dial to show the last feeding time, making it easy for everyone in the household to see when the pet was last fed.
Also the magnets on the back allow the tracker to attach to metal surfaces such as a refrigerator, so it can be conveniently placed in the kitchen or near the pet food area.
Simple, practical, and perfect for households where multiple people feed the pet.
Two language versions are available:
English: morning / midday / evening
German: morgens / mittags / abends
Have fun!
Assembly / Hardware
Hardware
Small round magnets (dimensions according to the model)
Magnets used in this build were purchased on Amazon (links below)
3 x Neodym magnets, 10 x 2 mm
2 x Neodym magnets, 3 x 1,7 mm
(The product description is 3 x 2 mm, actually they are 3 x 1,7 mm)Any magnets with the same dimensions will work as well
Magnet Installation
Glue the magnets into the designated slots.
Check the magnet polarity before gluing.
The magnets in the top and bottom parts must attract each other, not repel.
A small drop of glue is sufficient.
Dial Assembly
Insert the rotating dial into the base.
The magnets create a smooth rotation with a satisfying snap at each position.
Cover Ring (Optional)
The cover ring is optional and mainly used for a cleaner look.
It can be lightly glued in place if desired.
Be careful not to get glue on the rotating parts, otherwise the dial may no longer turn freely.
Color Change (Optional)
The model is designed for filament color changes at specific layer heights.
Switching filament at the correct layers will create the color effect shown in the example photos.
At 0,2 mm layer hight and for 2-colour-sign:start with base colour
1,8 mm change to text colour
3,0 mm change back to base colour
3,2 mm change back to text colour