SV08 Top Hat 220mm Magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
220mm Top Hat for SV08 for Toolchangers/INDX
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 21
- Makes
- 0
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
I did some changed some things from the original model, mostly for static reasons and also to reduce the amount of different parts.
Use of 6×3 mm magnets instead of 5×3 mm.
Standardization of parts so that fewer different components need to be printed.
The cable entry was moved to the back; in the original model it would have been on the side.
The cable entry was separated into its own part, allowing it to be omitted or modified.
The outer design with the 3D-printer-style grooves was retained.
The overall fit was revised and improved.
The through screws were replaced with heat-set inserts and screws only from inside.
BOM:
64 x Brass heat-set threaded insert M3x4x5mm
50 x M3x8mm flat head socket screw
4 x M3x25mm hex socket head cap screws
4 x M3x30mm hex socket head cap screws
4 x M3x35mm hex socket head cap screws
20 x Magnet 6x3mm
Superglue