Speed Climbing Hold Fridge Magnets (Parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turn your fridge into a tiny IFSC speed climbing wall.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 81
- Makes
- 1
- Views
- 388
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
Turn your fridge into a tiny IFSC speed climbing wall.
The model includes a magnet hole on the back.
You will need a small amount of glue to secure the magnet in place.
This model is parametric, you can change it to fit different magnet sizes and scale the hold up or down.
What can you change?
Download the Fusion 360 design file, open it, then go to Solid → Modify → Change Parameters to customize it.
Parameters
Parameter | Default Value | Description |
scale | 0.3 | Hold scale |
magnet_diameter | 10.2 mm | The magnet diameter (add a bit of clearance, usually 0.2 mmm, for an easier fit) |
magnet_height | 3 mm | The magnet thickness |
Printing recommandations
Use 0.08mm or 0.12mm layer height for best results, as the model includes many rounded surfaces and gentle slopes.
Enable the Fuzzy Skin setting in your slicer for a more realistic hold texture.
Recommanded settings:
Fuzzy Skin Mode: Contour
Fuzzy Skin Point Distance: 0.4mm
Fuzzy Skin Thickness: 0.2mm
Display recommandations
You will need 20 holds if you want to recreate the full IFSC official speed route.
Please do not tilt your fridge to reproduce the 5° overhang, even if it's tempting.