1 / 2
Nucleo F446RE Case with Press-Fit Lid – v1 — image 1
1 / 2

Nucleo F446RE Case with Press-Fit Lid – v1

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Two-part enclosure for Nucleo-64 F446RE. Press-fit lid. Cutouts for USB, buttons, Morpho headers CN7–CN10, LED windows

Rating
0 / 5
Likes
2
Downloads
109
Makes
0
Views
326
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

A clean two-part enclosure for the STM32 Nucleo-64 F446RE development board. The lid attaches with a press-fit — no screws or glue required.

Designed cutouts:

  • USB port (CN1) for cable access

  • User buttons B1 and B2

  • Morpho headers CN7, CN8, CN9, and CN10 (fully exposed)

  • Three small holes for the onboard LEDs (LD1, LD2, LD3) so status is always visible

Print settings:

  • Material: PLA

  • Layer height: 0.2 mm

  • Infill: 20–30 %

  • Supports: not required

This is version 1. I plan to iterate based on fit and feedback — corrections and improvements will follow.

Feedback and remixes are very welcome!

Tags