Caliper depth bridge (fits in Tesa/Hexagon box)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a depth bridge for my caliper that fits in the box.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
(Original model made by @a123qwertz567)
I needed a depth measuring bridge for my Tesa/Hexagon caliper. The original one is to big for the box that came with the caliper and micrometer, so i changed the size a bit.
I printet it with PETG, supports enabled and the standard strenght profile.
For more informations check the original design here.
Important:
Make sure you post a make so I can see I'm not wasting my time xD
If you have any questions, ideas, concerns and objections please let me know.
Additional parts needed:
2x M3 threaded insert (l=5,7mm d_out=4,6mm), short insert possible
1x M3x20 hex screw
Assembly:
Mold the inserts in the bridge part.
Mold the insert in the thumb screw part.
Remove excess plastic while it is soft (or use it like a Nylock nut in the thumbscrew xD).
Put the M3 screw tight in the thumb screw part.
Screw the thumb screw in the bridge.
Source files in the Alibre Atom format is available but the website does not allow the upload. If you need it send me a message.