Prusa CORE One panel plugs (magnetic)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.17 – €0.20 net (excluding VAT)
For file: C1_Plugs_GPLA_C1.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.18 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 9 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Magnetic plugs for the panel holes in the rear panel below the cables as well as the right side filament spool plate.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 23
- Makes
- 1
- Views
- 178
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
Measured and modeled these directly from the CORE One's CAD files to plug the holes, control airflow, and potentially improve your printer's aesthetics. Fits 8x3mm magnets like these by friction, easiest installed when fresh off the build plate and cooled into place. The magnets allow for easy install and removal in the future should you need the openings, though you should still expect a tight fit with the bump outs. I printed my samples in PETG.
Includes a 3MF PrusaSlicer project with these settings:
Generic PLA
0.2mm Balanced
15% Infill
No supports
Prusa CORE One, 0.4mm HF nozzle
Also includes print files; one with above settings, one with generic PETG instead.
Additional model files are included in other formats for you to modify and use.