Fat e-bike extension kit! — rugged bumper for rear bike rack, fender skirt & handlebar battery box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rugged bumper for rear bike rack, fender skirt & handlebar battery box
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 150
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
About this collection
This is a three-piece functional kit for fat e-bikes with a rear rack. The goal was simple: extend the rear protection, clip a battery-powered tail light, and store small electronics under the handlebar — all in a rugged, vintage aesthetic that looks like it belongs on the bike.
The bumper has a flat sticker panel on the front face — because every adventure deserves a souvenir. Stick on wherever you ride, and let the bike tell the story.
All structural parts are printed in PETG for rigidity, UV resistance and weather durability. The fender extension uses TPU for flexibility — it absorbs vibration and won't crack over rough terrain.
Parts in this collection
Rear rack bumper
Mounts directly on the rear rack. Inspired by the raw steel bumpers of vintage off-road vehicles. Features a recessed slot to clip any standard battery-powered tail light, and a wide flat surface on the front face dedicated to travel stickers.
Slot holes on each end are sized for UV-resistant cable ties — zip ties hold up far better than standard ones under direct sun and temperature swings, so make sure to grab the right kind. The rounded bumper profile is sized to fit standard rubber band accessories (the kind that loops around a bar), giving you an extra attachment point for lights or bungee hooks.
Print settings: PETG, 5 perimeters, 40% cubic infill. The extra perimeter count is what really drives strength here — cubic infill adds excellent multi-directional rigidity.
Fender extension skirt (TPU)
Clips onto the end of the stock plastic fender and extends downward as a flared skirt — wider at the bottom than the top for maximum mud and water deflection. The C-shaped profile follows the curve of the original fender. The clip section grips the existing fender edge firmly without glue or screws. Print in TPU 95A, 2mm wall thickness, 3 perimeters, 15% infill.
Under handlebar battery box
A compact under-stem box sized to hold small battery packs. Lid snaps on with cables ties.
It may and may not work for you. So print and install at your discretion.
Designed and tested on a fat e-bike with a standard rear rack. All parts were modeled from scratch in FreeCAD 1.0.2 using Part Design and Assembly workbenches. If you remix or adapt these parts, feel free to share — and tag your adventure photos! Printed on a Flashforge Adventurer 5M.
A personal note: this is my very first FreeCAD project — please be kind! I learned everything from scratch and did my best, but I'm sure experienced eyes will spot things to improve. If you find a way to make it better, remixes are very welcome.